Fermzilla - 27 litros

KL0683

Novo produto

The new and improved FermZilla 27L brought to you by the critical key minds and engineers behind the original Gen1. But with all the tweaks that make it the most cost-effective conical fermenter to date!

Mais detalhes

Aviso: Últimos itens disponíveis!

Ao comprar este produto pode ganhar até 9 pontos de fidelização. Seu carrinho totalizará 9 pontos de fidelização que podem ser convertidos num vale de desconto de 1,80 €.


99,90 €

Mais informação

The new and improved FermZilla 27L brought to you by the critical key minds and engineers behind the original Gen1. But with all the tweaks that make it the most cost-effective conical fermenter to date! 

The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone's budget.  With the FermZilla you have the many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.
This is an incredible product at an extremely attractive price point and available in FermZilla 27L and FermZilla 55L sizes.

Add the optional pressure kit to your FermZilla 27L and turn your FermZilla into a true uni tank. 
Uni tanks are conical fermenters used both for fermentation and for carbonating and serving finished beer. 
This extremely inexpensive upgrade will truly show you what the FermZilla was designed for
KB02113 - KegLand Red Plastic FermZilla Pressure Kit
this is compatible with the Conical and All-Rounder Models in all sizes.

These units were designed for use with CO2.

New and Improved:
1. Larger Dump Valve
2. Larger opening
3. Pressure rating 2.4bar (35psi)
4. Designed to fit in the new WiFi Fermenter Fridges (coming soon)
In The Box
1 x FermZilla 27L Tank with Butterfly Dump Valve Parts (Pre-Assembled & Attached)
1 x Reinforced  Stainless Steel Stand with Handles
1 x Top Lid with Red PRV (35psi) [2 x Male Cap Threads] [Up to 4 drill ports for accessories]
1 x Top Lid Screw Cap
1 x 1000mL Collection Container & Lid* [2 x Male Cap Threads]
1 x KegLand Adjustable Easy Opening Tool
1 x Premium 3 Piece Airlock
1 x Approximate Graduations Sticker 
1 x Strip Stick On Thermometer
3 x Black Bottle Caps (Attached) 
1 x Grommet Bottle Cap (Airlock Port)
1 x Spare Seals

Collection container lid is not pressure rated*

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof. To do this. Fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads.

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But dont panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.

 

Instructions:
To download the instruction sheet for this product click on the link below:
FermZilla 27L - PDF Instruction Manual

Dimensions:
To download the sizes for the FermZilla in both the 27L click the link below. Please measure up before purchasing.
FermZilla 27L

Warnings:
Please read the instructions thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.

 

To see the video on this product look below:

 

We have also made this video here to show you how to get the Dump Valve Together.  Some people get a bit confused with the reverse left hand thread so we thought we should make a video explaining this.

 

Are you interested in fitting a glycol heating or cooling coil for temp control then you might want to check out this product.  This coil can fit into the lid of these fermenters and it's a complete kit that includes the duotight bulkhead fittings.  To see the Temp Twister Stainless Coil Click Here.

If you want to fit a thermowell to the lid of this fermenter then you should really check out this 60cm Stainless Thermowel that includes the bulkhead fitting so you can mount this into the lid of this Fermenter.

 

If you want to see another review on the product you can see this one from PubSheds in the UK:

 

Here is another video from a product reviewer called David Heath who has a great channel based in Europe:

 

For some really handy tips and tricks you can see a video from Gash.  He is a total legend:

We sometimes get asked what is the easiest way to clean the dump valve seal on the FermZilla conical unitank and this is definitely the easiest way.  Soak in PBW cleaning solution (for 5 minutes max) then use a high pressure hose to squirt around the seal and this releases any built up hops etc.  See video below.